dmesg - xbosoft03 Memory Test
CPU0 microcode updated early to revision 0x7, date = 2013-08-20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-141-generic (buildd@lgw01-amd64-018) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #190-Ubuntu SMP Fri Jan 19 12:52:38 UTC 2018 (Ubuntu 3.13.0-141.190-generic 3.13.11-ckt39)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-141-generic root=/dev/mapper/mmnserver--vg-root ro rootdelay=60 quiet splash net.ifnames=1 biosdevname=0 vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000bf698fff] usable
BIOS-e820: [mem 0x00000000bf699000-0x00000000bf6aefff] reserved
BIOS-e820: [mem 0x00000000bf6af000-0x00000000bf6cdfff] ACPI data
BIOS-e820: [mem 0x00000000bf6ce000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge R210/0VMKH1, BIOS 1.3.4 05/24/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask F00000000 write-back
3 base 200000000 mask E00000000 write-back
4 base 400000000 mask FC0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf699 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fec000, 0x01fecfff] PGTABLE
BRK [0x01fed000, 0x01fedfff] PGTABLE
BRK [0x01fee000, 0x01feefff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 2M
BRK [0x01fef000, 0x01feffff] PGTABLE
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbf698fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbf5fffff] page 2M
[mem 0xbf600000-0xbf698fff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
RAMDISK: [mem 0x357f0000-0x36beffff]
ACPI: RSDP 00000000000f0a10 000024 (v02 DELL )
ACPI: XSDT 00000000000f0b10 000094 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000bf6c3bb4 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000bf6af000 00398C (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000bf6c6000 000040
ACPI: APIC 00000000bf6c3478 000152 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000bf6c35cc 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000bf6c3620 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000bf6c365c 0000A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000bf6c3850 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000bf6c3890 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000bf6c39c8 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000bf6b2b0c 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000bf6b2d7c 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000bf6b298c 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000bf6b29bc 000150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000bf6c3b4c 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000bf6c7000 002574 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43ffee000-0x43fff2fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xbf698fff]
node 0: [mem 0x100000000-0x43fffffff]
On node 0 totalpages: 4191796
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12187 pages used for memmap
DMA32 zone: 779929 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf699000-0xbf6aefff]
PM: Registered nosave memory: [mem 0xbf6af000-0xbf6cdfff]
PM: Registered nosave memory: [mem 0xbf6ce000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042f200000 s83968 r8192 d22528 u131072
pcpu-alloc: s83968 r8192 d22528 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4126276
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-141-generic root=/dev/mapper/mmnserver--vg-root ro rootdelay=60 quiet splash net.ifnames=1 biosdevname=0 vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16398188K/16767184K available (7448K kernel code, 1162K rwdata, 3428K rodata, 1360K init, 1448K bss, 368996K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
NR_IRQS:16640 nr_irqs:936 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2660.168 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.33 BogoMIPS (lpj=10640672)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
FEATURE SPEC_CTRL Not Present
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
Freeing SMP alternatives memory: 32K (ffffffff81e78000 - ffffffff81e80000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28700 entries in 113 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed50000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed50000 ver 1:0 cap c90780106b0462 ecap f020e2
dmar: RMRR base: 0x000000bf7c8000 end: 0x000000bf7dffff
dmar: RMRR base: 0x000000bf7c0000 end: 0x000000bf7c0fff
dmar: RMRR base: 0x000000bf7c2000 end: 0x000000bf7c2fff
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
CPU1 microcode updated early to revision 0x7, date = 2013-08-20
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2 microcode updated early to revision 0x7, date = 2013-08-20
CPU3 microcode updated early to revision 0x7, date = 2013-08-20
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (42562.68 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 4:16:40, date: 02/16/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:d130] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf0fa000-0xdf0fa3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf0fc000-0xdf0fc3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b14] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xecd0-0xecd7]
pci 0000:00:1f.2: reg 0x14: [io 0xecc8-0xeccb]
pci 0000:00:1f.2: reg 0x18: [io 0xecd8-0xecdf]
pci 0000:00:1f.2: reg 0x1c: [io 0xeccc-0xeccf]
pci 0000:00:1f.2: reg 0x20: [io 0xece0-0xecff]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf0fe000-0xdf0fe7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1000:0058] type 00 class 0x010000
pci 0000:01:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:01:00.0: reg 0x14: [mem 0xdf2ec000-0xdf2effff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xdf100000-0xdf1fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:02:00.0: [14e4:163b] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: [14e4:163b] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xdc000000-0xddffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:03:03.0: [102b:0532] type 00 class 0x030000
pci 0000:03:03.0: reg 0x10: [mem 0xd9800000-0xd9ffffff pref]
pci 0000:03:03.0: reg 0x14: [mem 0xde7fc000-0xde7fffff]
pci 0000:03:03.0: reg 0x18: [mem 0xde800000-0xdeffffff]
pci 0000:03:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:03:03.0
vgaarb: device added: PCI:0000:03:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci 0000:ff:00.0: [8086:2c50] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf699000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
hpet: hpet4 irq 42 for MSI
hpet: hpet5 irq 43 for MSI
hpet: hpet6 irq 44 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0880-0x08ff] has been reserved
system 00:06: [io 0x0900-0x091f] has been reserved
system 00:06: [io 0x0920-0x0923] has been reserved
system 00:06: [io 0x0924] has been reserved
system 00:06: [io 0x0ca0-0x0ca7] has been reserved
system 00:06: [io 0x0ca9-0x0cab] has been reserved
system 00:06: [io 0x0cad-0x0caf] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:07: [irq 0 disabled]
system 00:07: [io 0x0ca8] has been reserved
system 00:07: [io 0x0cac] has been reserved
system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:08: [irq 0 disabled]
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0b: [mem 0xfed50000-0xfed53fff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xda000000-0xddffffff]
pci 0000:03:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:03: resource 2 [mem 0xd9800000-0xd9ffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfdffffff]
pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20480K (ffff8800357f0000 - ffff880036bf0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb699000-0xbf699000] (64MB) mapped at [ffff8800bb699000-ffff8800bf698fff]
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x7
microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1518754599.540:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32067
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:03.0: device [8086:d138] has invalid IRQ; check vendor BIOS
pcieport 0000:00:03.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd9800000, mapped to 0xffffc90011b80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 22, io mem 0xdf0fa000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-141-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 22, io mem 0xdf0fc000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-141-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
tsc: Refined TSC clocksource calibration: 2659.983 MHz
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 29802094c6bbaea88350703be22a37388075ff7e'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 6:318:262
memory memory132: hash matches
rtc_cmos 00:03: setting system clock to 2018-02-16 04:16:41 UTC (1518754601)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1360K (ffffffff81d24000 - ffffffff81e78000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 732K (ffff880001749000 - ffff880001800000)
Freeing unused kernel memory: 668K (ffff880001b59000 - ffff880001c00000)
systemd-udevd[197]: starting version 204
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.4 (Aug 05, 2013)
bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr b8:ac:6f:9a:f2:77
bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr b8:ac:6f:9a:f2:78
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems sxs apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xdf0fe000 port 0xdf0fe380 irq 47
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg0 type 5
ioc0: LSISAS1068E B3: Capabilities={Initiator}
Switched to clocksource tsc
usb 2-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.5:1.0: USB hub found
hub 2-1.5:1.0: 4 ports detected
scsi6 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 0, sas_addr 0x1221000000000000
scsi 6:0:0:0: Direct-Access ATA SAMSUNG HE161HJ 1121 PQ: 0 ANSI: 5
scsi 6:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
scsi 6:0:1:0: Direct-Access ATA SAMSUNG HE161HJ 1121 PQ: 0 ANSI: 5
scsi 6:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 6:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 6:1:0:0: Attached scsi generic sg3 type 0
sd 6:1:0:0: [sda] 311427072 512-byte logical blocks: (159 GB/148 GiB)
sd 6:1:0:0: [sda] Write Protect is off
sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 6:1:0:0: [sda] No Caching mode page found
sd 6:1:0:0: [sda] Assuming drive cache: write through
sd 6:1:0:0: [sda] No Caching mode page found
sd 6:1:0:0: [sda] Assuming drive cache: write through
random: nonblocking pool is initialized
sda: sda1 sda2 < sda5 >
sd 6:1:0:0: [sda] No Caching mode page found
sd 6:1:0:0: [sda] Assuming drive cache: write through
sd 6:1:0:0: [sda] Attached SCSI disk
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (301) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (313) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (315) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (316) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (318) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (320) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (322) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (323) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (325) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: resolvconf pre-start process (340) terminated with status 127
init: resolvconf post-stop process (364) terminated with status 127
ERST: NVRAM ERST Log Address Range not implemented yet.
Adding 16769020k swap on /dev/mapper/mmnserver--vg-swap_1. Priority:-1 extents:1 across:16769020k FS
systemd-udevd[419]: starting version 204
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20131115/exfield-299)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88042924ec58), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88042924ebb8), AE_AML_BUFFER_LIMIT (20131115/psparse-536)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20131115/power_meter-756)
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
lp: driver loaded but no devices found
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
gpio_ich: GPIO from 180 to 255 on gpio_ich
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
ipmi device interface
type=1400 audit(1518754628.368:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
type=1400 audit(1518754628.368:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
type=1400 audit(1518754628.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
type=1400 audit(1518754628.368:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
type=1400 audit(1518754628.368:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
type=1400 audit(1518754628.368:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
type=1400 audit(1518754628.368:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=484 comm="apparmor_parser"
type=1400 audit(1518754628.368:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=484 comm="apparmor_parser"
type=1400 audit(1518754628.368:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=484 comm="apparmor_parser"
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
bnx2 0000:02:00.0: irq 48 for MSI/MSI-X
bnx2 0000:02:00.0: irq 49 for MSI/MSI-X
bnx2 0000:02:00.0: irq 50 for MSI/MSI-X
bnx2 0000:02:00.0: irq 51 for MSI/MSI-X
bnx2 0000:02:00.0: irq 52 for MSI/MSI-X
bnx2 0000:02:00.0: irq 53 for MSI/MSI-X
bnx2 0000:02:00.0: irq 54 for MSI/MSI-X
bnx2 0000:02:00.0: irq 55 for MSI/MSI-X
bnx2 0000:02:00.0: irq 56 for MSI/MSI-X
bnx2 0000:02:00.0 eth0: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:02:00.1: irq 57 for MSI/MSI-X
bnx2 0000:02:00.1: irq 58 for MSI/MSI-X
bnx2 0000:02:00.1: irq 59 for MSI/MSI-X
bnx2 0000:02:00.1: irq 60 for MSI/MSI-X
bnx2 0000:02:00.1: irq 61 for MSI/MSI-X
bnx2 0000:02:00.1: irq 62 for MSI/MSI-X
bnx2 0000:02:00.1: irq 63 for MSI/MSI-X
bnx2 0000:02:00.1: irq 64 for MSI/MSI-X
bnx2 0000:02:00.1: irq 65 for MSI/MSI-X
bnx2 0000:02:00.1 eth1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: Failed to spawn ufw pre-start process: unable to execute: No such file or directory
init: Failed to spawn ufw post-stop process: unable to execute: No such file or directory
init: failsafe main process (852) killed by TERM signal
bnx2 0000:02:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
bnx2 0000:02:00.0: irq 48 for MSI/MSI-X
bnx2 0000:02:00.0: irq 49 for MSI/MSI-X
bnx2 0000:02:00.0: irq 50 for MSI/MSI-X
bnx2 0000:02:00.0: irq 51 for MSI/MSI-X
bnx2 0000:02:00.0: irq 52 for MSI/MSI-X
bnx2 0000:02:00.0: irq 53 for MSI/MSI-X
bnx2 0000:02:00.0: irq 54 for MSI/MSI-X
bnx2 0000:02:00.0: irq 55 for MSI/MSI-X
bnx2 0000:02:00.0: irq 56 for MSI/MSI-X
bnx2 0000:02:00.0 eth0: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:02:00.1: irq 57 for MSI/MSI-X
bnx2 0000:02:00.1: irq 58 for MSI/MSI-X
bnx2 0000:02:00.1: irq 59 for MSI/MSI-X
bnx2 0000:02:00.1: irq 60 for MSI/MSI-X
bnx2 0000:02:00.1: irq 61 for MSI/MSI-X
bnx2 0000:02:00.1: irq 62 for MSI/MSI-X
bnx2 0000:02:00.1: irq 63 for MSI/MSI-X
bnx2 0000:02:00.1: irq 64 for MSI/MSI-X
bnx2 0000:02:00.1: irq 65 for MSI/MSI-X
bnx2 0000:02:00.1 eth1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Switched to clocksource hpet
bnx2 0000:02:00.0 eth0: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=205.204.101.152 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=34644 DF PROTO=TCP SPT=25 DPT=53493 WINDOW=29200 RES=0x00 ACK FIN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=205.204.101.152 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=34645 DF PROTO=TCP SPT=25 DPT=53493 WINDOW=29200 RES=0x00 ACK FIN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=205.204.101.152 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=34646 DF PROTO=TCP SPT=25 DPT=53493 WINDOW=29200 RES=0x00 ACK FIN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=205.204.101.152 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=34647 DF PROTO=TCP SPT=25 DPT=53493 WINDOW=29200 RES=0x00 ACK FIN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=205.204.101.152 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=41 ID=34648 DF PROTO=TCP SPT=25 DPT=53493 WINDOW=29200 RES=0x00 ACK FIN URGP=0
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[sched_delayed] \x014CE: hpet increased min_delta_ns to 20115 nsec
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=184.73.251.192 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=35 ID=0 DF PROTO=TCP SPT=22 DPT=55282 WINDOW=0 RES=0x00 RST URGP=0
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
perf samples too long (5034 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 1000 Mbps full duplex
bnx2 0000:02:00.1 eth1: NIC Copper Link is Down
bnx2 0000:02:00.1 eth1: NIC Copper Link is Up, 100 Mbps full duplex
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=184.73.251.192 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=35 ID=0 DF PROTO=TCP SPT=22 DPT=50120 WINDOW=0 RES=0x00 RST URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:30:d1:7e:b2:93:bc:08:00 SRC=184.73.251.192 DST=10.1.3.11 LEN=40 TOS=0x00 PREC=0x00 TTL=35 ID=0 DF PROTO=TCP SPT=22 DPT=50123 WINDOW=0 RES=0x00 RST URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:1c:1b:0d:87:16:5d:08:00 SRC=10.1.1.37 DST=10.1.3.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3249 DF PROTO=TCP SPT=52426 DPT=8022 WINDOW=8192 RES=0x00 SYN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:1c:1b:0d:87:16:5d:08:00 SRC=10.1.1.37 DST=10.1.3.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3250 DF PROTO=TCP SPT=52427 DPT=8022 WINDOW=8192 RES=0x00 SYN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:1c:1b:0d:87:16:5d:08:00 SRC=10.1.1.37 DST=10.1.3.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3252 DF PROTO=TCP SPT=52426 DPT=8022 WINDOW=8192 RES=0x00 SYN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:1c:1b:0d:87:16:5d:08:00 SRC=10.1.1.37 DST=10.1.3.11 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3253 DF PROTO=TCP SPT=52427 DPT=8022 WINDOW=8192 RES=0x00 SYN URGP=0
iptables denied: IN=eth0 OUT= MAC=b8:ac:6f:9a:f2:77:1c:1b:0d:87:16:5d:08:00 SRC=10.1.1.37 DST=10.1.3.11 LEN=48 TOS=0x00 PREC=0x00 TTL=64 ID=3257 DF PROTO=TCP SPT=52426 DPT=8022 WINDOW=8192 RES=0x00 SYN URGP=0
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.